Product ID:UTP CP TI 1
MSDS Date:04/01/1988
FSC:3439
NIIN:00F009482
MSDS Number: BHGLV

Emergency Phone: (713) 530-1555

Info Phone: (713) 530-1555

Preparer: M. ISENHART

Cage: UTPWE

Telephone: (713) 530-1555 OR (800) 527-0791

Cage: UTPWE

TITANIUM (DRY POWDER) (TI)

CAS: 7440-32-6

RTECS: XR1700000

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY RESULT IN DISCOMFORT,
DRYNESS, IRRITATION OF NOSE, THROAT, & EYES, DIZZINESS, NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: CAN LEAD TO SIDEROSIS (IRON DEPOSITS
IN THE LUNGS) & MAY EFFECT PULMONARY FUNCTIONS. SKIN: BURNS CAN BE
TREATED WITH COMMERICAL OINTMENTS. ARC RAYS CAN INJURE EYES/BURN
SKIN.
Medical Cond Aggravated by Exposure:PULMONARY IRRITATION

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN BURNS: TREAT
W/OINTMENTS.

Unusual Fire/Explosion Hazard:ARC & SPARK COULD BE SOURCE OF IGNITION
OF COMBUSTIBLE PRODUCTS.

Handling and Storage Precautions:COOL & DRY STORAGE. WHEN WELDING,
BRAZING, OR SOLDERING: WELDING ARC OR TORCH FLAME MAY BE A SOURCE
OF IGNITION OF COMBUSTIBLE PRODUCT.
Other Precautions:ONE RECOMMENDED WAY TO DETERMINE THE COMPOSITION/QTY
OF FUMES & GASES TO WHICH WORKERS ARE EXPOSED IS TO TAKE AN AIR
SAMPLE FROM INSIDE THE WELDER'S HELMET IF WORN OR IN THE WORKER'S
BREATHING ZONE.

Respiratory Protection:USE RESPIRABLE FUMES OR AIR SUPPLIED RESPIRATOR
WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST VENTILATION
DOES NOT KEEP EXPOSURE Ventilation:USE ENOUGH VENTILATION, LOCAL EXAUST AT THE ARC TO KEEP
FUMES & GASES Protective Gloves:WELDER'S
Eye Protection:USE FACE SHIELD W/FILTER LENS SHADE 10
Other Protective Equipment:ARM PROTECTORS, APRONS, SHOULDER PROTECTION.
Work Hygienic Practices:TRAIN THE WELDER NOT TO TOUCH LIVE ELECTRICAL
PARTS.
Supplemental Safety and Health

Appearance and Odor:BARE WIRE, NO SPECIFIC ODOR.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN, OZONE,
METAL OXIDES

Waste Disposal Methods:MATERIAL SHOULD BE USED UP OR DISPOSE OF IN AN
ENVIRONMENTALLY SAFE MANNER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.